Concrete Solutions for Decorative Concrete Resurfacing, Concrete Acid Stain, Concrete Dye, Colored Concrete, Concrete Counter Countertop Solutions, Concrete Stamping

5 Step procedure for Ultra Surface® 1/4" STAMPING System

Step 1 - Surface Preparation
Step 2 - Crack Repair
Step 3 - Patching holes, spalls and low spots
Step 4 - Spreading the Squeegee/Bond Coat and 1/4" Stamping Mix
Step 5 - Troweling, Stamping, Antiquing and Sealing

Step 3: Patching Holes, Spalls, Low Spots and Deteriorated Areas

After the surface preparation and crack repairs are completed, the next step is to patch any holes, spalls, low spots and/or deteriorated areas with Ultra Surface Polymer Concrete Patching Mix before starting the resufacing and texturing process.

Fig. 1
Patch Holes with Ultra Surface Polymer Concrete Patching Mix.

Fig. 2
Patch Spalls with Ultra Surface Polymer Concrete Patching Mix.

Fig. 3
Patch low spots with Ultra Surface Polymer Concrete Patching Mix.

Fig. 4
Patch deteriorated areas with Ultra Surface Polymer Concrete Patching Mix.

Fig. 5
Ultra Surface Polymer Concrete Patching Mix can be used for applications between 1/16th of an inch up to 2 inches deep and feathered to zero.

For more information about Ultra Surface Polymer Concrete Patching Mix call us toll free at (800) 232-8311 or click here to contact us by email.

Go To Step 1 2 3 4 5

Download PDF of Illustrated Instructions