|
Step 5 - Remove Loose Color Flakes and Apply the Topcoat Sealer
|
|
|
|
Fig. 15
Sweep and blow off loose flakes. These can be re-used later on another job. |
|
|
|
|
|
Fig. 16
Scrape the floor using the Ultra Surface Metal Squeegee to remove any flake edges sticking up, then blow again. |
|
|
|
|
|
|
Fig. 17
Apply 2 coats of SB or HB Urethane Clear. For indoor jobs only, Epoxy 600 Clear can be used to achieve a smoother finish |
|
|
|
|
Fig. 18
Allow to dry 48 hours before opening to vehicle traffic.
|
|
|
|
|
For more detailed instructions on the Color Flake System and other Ultra Surface® Systems, information booklets with step by step pictures are available upon request. Before applying any of the Ultra Surface® Systems we recommend attending one of our 2 day training classes in Las Vegas, Nevada.
For more information on the training class click here.
|
