Cement can now be sprayed on like paint! Introducing Spray-Top!
Spray-Top is a revolutionary polymer cement product developed by Concrete Solutions for restoring old, stained, smooth or stamped concrete to a like new solid color or decorative finish.
 One of the outstanding benefits of Spray-Top is that it can be applied in the same way as paint, so thin that the existing texture is preserved. This is
especially important when going over stamped concrete surfaces. Once it is dry, Spray-Top looks similar to a professionally finished color hardener or integral colored concrete job. Even the most experienced concrete finisher will have difficulty telling the difference.
Spray-Top, unlike ordinary concrete, can be applied in any color. Think of the possibilities!
Concrete Solutions was the first company to introduce 1/4” Stamped Concrete in 1995 and we were the first to introduce Spray-Top to the World of Concrete show in 2002. It is still the only product of its kind on the market today.
 Spray-Top is easy to apply, using special, modified, spray equipment to achieve a smooth, hard-troweled appearance. If you know how to spray paint you can apply Spray-Top.
The equipment is available through Concrete Solutions in three different sizes. Call or email us for details or click here to see packages.
Here are just a few of the high profile jobs Spray-Top has been successfully used on:
| SBC Center, Texas |
120,000 sq. ft. |
Interior Walkways
|
| Hilton Hotel, CA |
28,000 sq. ft. |
Driveway/Walkways |
| Reno Event Center |
20,000 sq. ft. |
Interior Walkways |
| Olivet Nazarene University, IL |
15,000 sq. ft. |
Exterior Stamped Concrete |
| Public Park, Hong Kong |
140,000 sq. ft. |
Exterior Walkways |
|
|
Hilton Hotel Parking |
Olivet Nazarene Univ. — Bourbonnais, IL. |
Read what one contractor had to say after using Spray-Top…
Just a short note to tell you how thrilled we are with your new Spray-Top material. We have used it with complete success on two commercial jobs and five residential jobs. We cannot believe how versatile it is. We have used it to recolor previously stamped concrete, recoat and recolor fountains and pots, renew stained surfaces, and apply stenciled patterns.
This material is not only a multipurpose product but it is incredibly easy to use. We have started offering it as regular part of our line of resurfacing systems. The customer response has been fantastic. We expect this product to take a role in a major portion of our work next year.
Once again, we need to thank you for your efforts in developing this new product. Spray- Top is sure to be a hit. As with all of your products, feel free to use us as a referral.
Sincerely,
John Kazalonis
President, Versa-Crete |
 |
 |
|
The most popular applications for Spray-Top include:
Applying Spray-Top over Regular Concrete or Polymer Concrete.
Spray-Top is great for restoring concrete that is faded, stained, or discolored to a like new appearance. The job below shows a Hilton Hotel parking lot resurfaced with an Ultra Surface Polymer Concrete Swirl-Finish texture and Spray-Top, followed by our HP Urethane clear sealer.
Applying Spray-Top over regular or 1/4" stamped Concrete.
Stamped concrete surfaces may have been difficult to restore in the past but not anymore. Spray-Top makes it easy to re-color old, faded or stained stamped concrete to look like new. The job below was refinished using our WB Epoxy primer, Spray-Top, Liquid Release, Antique Powders and Stamped Concrete Sealer.
Applying Spray-Top over Interior Floors Prior to Acid Staining.
Interior concrete floors often have stains, discoloration, or surface blemishes that make it difficult to achieve the optimum results with acid stains. Spray-Top provides a uniform cement canvas, in any color desired, allowing for beautiful acid stained floors. If a mistake is made, simply Spray-Top over it and start again.
Another advantage of Spray-Top is that it can be sprayed over decorative saw-cuts without filling them in. The Job below was achieved using Ultra Surface Resurfacer, Spray-Top, Acid Stains and Acrylic Urethane.
Applying Spray-Top over decorative stencils and Modello patterns.
This is the newest application Spray-Top is being used for. Instead of sandblasting, Spray-Top can be applied over decorative Modello patterns and designs to create beautiful borders, tiles and medallions on concrete floors and other surfaces.
 |
 |
 |
| Laying out Modello design |
Spraying Modello design with Spray-Top |
Apply Acid Stain and Seal |
 |
Choose from over 100 Borders,
Tiles and Medallions!
Click Here
|
 |
|
 |
 |
Besides the applications above, Spray-Top is also being used by the foam industry to make foam shapes look like cement and for vertical wall applications.
Here is one more testimonial from a satisfied contractor…
Dear Bart, Rod and Gerry,
Just wanted to take a moment and thank you for the Spray-Top system. In my 12 years in the industrial and decorative flooring market the Spray-Top system has to be the best thing that I have seen. Could not believe how easy the material was to apply with the Spray-Top spray rig. We completed a project today where we applied the natural color and applied an acid stain over the top. "Looks Great." I see a huge demand for the system and qualified contractors to install it
Thanks for your help,
Tim Hicks
President, T.W. Hicks, Inc |
Training Classes
We offer a two-day hands-on Advanced Training Class in Las Vegas, Nevada, to teach you how to use the Spray-Top, Acid Stain, and Modello system.
Click here for more information on our Advanced Training Class.
Spray-Top DVD
A Spray-Top Instructional DVD showing 5 different job applications is available for a limited time for only $10 (Normally $25.00) plus shipping.
Click here to order
For more information on our Spray-Top System please click on one of the tabs above or below.
|
