Concrete Polymer
A liquid concentrate to be mixed with water, cement and sand. Makes Ultra Surface Polymer Concrete for repairing, resurfacing, texturing and stamping.
|
Resurfacer Bag Mix
A pre-mixed 50lb. bag ready to be mixed with Ultra Surface Concrete Polymer and water. Used as the initial polymer concrete bond coat or smoothing coat prior to applying a polymer concrete texture coat or 1/4" stamping application.
|
1/4 in. Stamping Mix
1/4" Stamping Bag Mix. A pre-mixed 50lb. bag of white cement and sand ready to be mixed with Ultra Surface Concrete Polymer and water. Used for 1/4" Stamping applications. Can also be used for patching up to 1/2" thick
|
Integral Color Paks
Pre-measured integral colors to add to Resurfacer, Spray-Top and 1/4" Stamping Bag Mixes. For Spray-Top and Resurfacer, add 2 paks per bag. For 1/4" Stamping add 1 pak per bag.
|
Integral Color Pigment 5 lb. pail
Integral Color Pigment – Powder pigment to be mixed with Ultra Surface Polymer Concrete to provide color throughout the mix. Less expensive than Integral Color Paks, but must measured yourself. Available in 30 colors.
|
Liquid Release Agent
Liquid Release Agent - Sprayed over Ultra Surface Polymer Concrete prior to stamping to prevent the stamps from sticking to the surface. Also can be mixed with Antiquing Color Powder to add highlight colors over stamping applications.
|
Antiquing Color Powder
Antiquing Color Powder - Mixed with Ultra Surface Liquid Release Agent and sometimes Stamped Concrete Sealer and Acrylic Urethane to provide antique highlight colors over stamped concrete applications.
|
Stamped Concrete Sealer
A clear, acrylic, solvent-based sealer for sealing 1/4” or regular stamped concrete, acid stained floors and many other applications.
For California residents and other areas with strict V.O.C. laws use Stamped Concrete Sealer V.O.C.
|
Acrylic Urethane Clear
A two component, clear, indoor / outdoor urethane used as a topcoat sealer over Ultra Surface Polymer Concrete ¼” Stamping, Spray-Top and Acid Stain applications. Provides a high gloss, durable finish.
|
Stamped Concrete Sealer V.O.C.
A clear, acrylic, solvent-based sealer for sealing 1/4” or regular stamped concrete, acid stained floors and many other applications.
V.O.C. COMPLIANT.
|
MRB Primer
Used as a primer over concrete prior to applying an Ultra Surface Polymer Concrete overlay system to help fight against possible moisture vapor transmission problems from below the surface.
|
Polymer Concrete Accelerator
Polymer Concrete Accelerator – Speeds up the drying time of Ultra Surface Polymer Concrete 1/4” stamping and patching mixes. Recommended in shady areas or when temperatures are below 65 degrees.
|
